note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: rs0205l doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / ssr1008 ssr1009 ssr1010 __ __ _ _ __ __ __ _ _ __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level lead options __ = straight leads db = bent down ub = bent up package m = to-254 z = to-254z SSR1008M, ssr1008z ssr1009m, ssr1009z ssr1010m, ssr1010z 10 amps 80 - 100 volts schottky rectifier features: ? extremely low forward voltage drop ? low reverse leakage current ? hermetically sealed package ? guard ring for overvoltage protection ? eutectic die attach ? 175 c operating junction temperature ? tx, txv, or space level screening available maximum ratings rating symbol value unit peak repetitive reverse voltage and dc blocking voltage ssr1008 ssr1009 ssr1010 v rrm v rwm v r 80 90 100 volts average rectified output current 3 / (resistive load, 60hz, sine wave, ta=25 c) i o 10 amps peak surge current 3 / (8.3 ms pulse, half sine wave, superimposed on i o , allow junction to reach equilibrium between pulses, ta=25 c) i fsm 200 amps operating and storage temperature t op & t stg -65 to +175 c maximum thermal resistance 3 / junction to case r jc 2.0 c/w notes: 1 / for ordering information, price, and availability- contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / for optimal performance, connect leads 2 & 3 together. to-254 to-254z
note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: rs0205l doc case outlines- to-254 and to-254z pin out: rectifier configuration 4 / pin 1- cathode pin 2- a node pin 3- anode to-254 (m suffix) to-254z (z suffix) optional bent down leads (mdb & zdb suffix) optional bent up leads (mub & zub suffix) for information on curves, contact the factory representative for engineering assistance. notes: 4 / pins 2 and 3 must be externally connected for best performance. solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SSR1008M, ssr1008z ssr1009m, ssr1009z ssr1010m, ssr1010z electrical characteristics (per leg) characteristics symbol max unit instantaneous forward voltage drop (i f = 1 adc, t a = 25 c, pulse) (i f = 5 adc, t a = 25 c, pulse) (i f = 10 adc, t a = 25 c, pulse) v f1 v f2 v f3 0.57 0.72 0.8 vdc instantaneous forward voltage drop (i f = 10 adc, pulse) t a = 100 c t a = -55 c v f4 v f5 0.70 0.90 vdc reverse leakage current (rated v r , t a = 25 c, pulse) i r1 100 a reverse leakage current (rated v r , t a = 100 c, pulse) i r2 5 ma junction capacitance (v r = 10 vdc, t a = 25 c, f = 1 mhz) c j 400 pf
|
